|
|
#11
03-03-13, 10:49
|
||||
|
||||
Transmission selectors and cover finished
Gearbox top end finished 3.jpg
After going to the effort of making a new reverse latch thingy, I found a good original one today while pulling another box selcetor set apart. All I wanted was one little spring for a selector rod ball. Gearbox top end finished 1.jpg Gearbox top end finished 2.jpg It took all afternoon, but the selectors, lever and cover are now finished. Gearbox mount 1.jpg Having done that, I went on to start cleaning up the rear trans mount. The seal is to be replaced, but the rest seems to be quite OK. Second gearbox 1.jpg The box that I pulled apart today seems to be a good candidate for use as well, so now I have a choice. I'll work on cleaning both until one shows more promise. Back to the manual for how to pull em apart. The gear lever moves easily, but doesn't shift the forks as it should. When paint is completely dry, i'll take a look, it'll be something simple..........I hope.
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) 
|
|
|
Threaded Mode