11 Set stuff

[guy labbe]

Originally Posted by Ron Pier

I made and welded on the earthing bracket today, and did a trial fit of the empty cabinet to the headboard. All looks OK to me. A bit of a struggle on my own, and Private Spoons didn't help at all! In fact he just got in the bloody way!!

Ron

Hi Ron , next to your new switch board there is a interior light type Wilmot Breeden type , any idea where i still can find two of them for my wireless C4?

Guy

[Ron Pier]

Sorry I missed your post Guy. I think I found that lamp on a stall at W&P some years ago. I'll email you a close up picture which you can use to advertise for them. Ron

[kevin powles]

Gents, does anyone have a spare front panel retaining clip complete for an Aussi 11 set to sell or trade?. (Canadian or Brit ones might be the same).

Thanks.

[Mike K]

Originally Posted by kevin powles

Gents, does anyone have a spare front panel retaining clip complete for an Aussi 11 set to sell or trade?. (Canadian or Brit ones might be the same).

Thanks.

The British sliding lock is different . The British set has a aluminium case and is generally neater . If you have one of those Aust. sliding locks to copy , its fairly easy to make on a small lathe .

[kevin powles]

Thanks for advice mike, I need to make the sliding lock but the catch is completely missing from the other, just easier if someone has one un thee spares box

Kevin.

[Mike K]

Originally Posted by kevin powles

Thanks for advice mike, I need to make the sliding lock but the catch is completely missing from the other, just easier if someone has one un thee spares box

Kevin.

Kevin

Not sure what you mean with "catch" . Is it the cracked housing with the keyhole shape pictured that the pin or lock slides along ? The British set uses a pressed out housing, rather than that horrible Aust. contraption that you need to find , with the three screws . Mike

[kevin powles]

Yes, that's the bit I need.

Kevin.