|
|
|
|
#1
14-02-06, 22:17
|
|||
|
|||
Interior rear body CGT Cab 13
Gents
Can any of you that have a CGT Cab 13 FAT e-mail me pictures of the interior? Looking for details of the rear half body,at the front looking at the ceiling. Details of the roof construction is what I am after, particularly the front door hinge pillar as it meets the ceiling I have the exterior details, so pics from out side won't help. Can you please post here or e-mail directly to me. I am in the process of reconstructing the upper 1/3 portion of the body which has been removed years ago, so its a challenge to reverse engineer it, a few pictures makes a big difference. Thanks Walde Vancouver BC Canada 
|
|
#2
01-03-06, 22:50
|
|||
|
|||
|
Is this what you are looking for ?
I can take some more pictures at the weekend if you let me know exactly what views you need. Alan Brock.
|
|
#3
02-03-06, 03:16
|
|||
|
|||
|
CGT Interior Pic
Allan
A big Thank You! Exactly what I was looking for! It seems the CGT body I took pics of in Newtonville Ontario in 2004 shows this area to be configured differently than the body I have. Mine is the same as yours, my rear body ID tag reads 4408 7B2 1972. I took measurements, but yours is more corrrect, if you could give me the length end to end of the "2X1" horizontal U channel, height from floor and the corner angle iron (in your pic) it would give me all I need, I think? E-mailing pics would help too? Walde Attached is the other body style from Newtonville, you can see a big difference.  
|
|
#4
06-04-06, 17:44
|
|||
|
|||
|
I have measured the distance from the TOP of the 2"x1" channel to the top face of the rear body floor panel, it is 1250mm.
The distance between the inside faces of the rear door pillars is 1734mm. Hope this is what you wanted. Alan Brock
|
 |
|
|
Hybrid Mode
