|
|
#1
02-06-25, 16:53
|
||||
|
||||
Shock rebuild
I’m about to start rebuilding the shocks for my Otter restoration. I’ll be following the information in the maintenance manual. However does anyone have any advice on replacing/rebuilding the rubber bushing on the arm pivot?
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer 
|
|
#2
02-06-25, 17:52
|
|||
|
|||
|
If my memory is OK, Bob Carriere sourced NOS shock links of similar bushing style from Vintage Power Wagons.
|
|
#3
03-06-25, 02:53
|
||||
|
||||
|
Bushing
More info needed .
Is that a rubber bushing inside the pivot point ? It.looks like the bushing slips over a short shaft or stud . But what stops the bushing from coming out ? It looks like the short stud will have to press out or grind the end off ? You could machine up a new poly bushing on a lathe. Poly bushings are now widely used in suspension components. If you don't have a small lathe, you really should get one. You will be making all types of stuff with it. More info. https://grassrootsmotorsports.com/ar...hane-bushings/ BTW Delrin is easy to buy. I recently machined up some Delrin O scale model railway wheels for a friend. Good luck .
__________________
1940 cab 11 C8 1940 Morris-Commercial PU 1941 Morris-Commercial CS8 1940 Chev. 15cwt GS Van ( Aust.) 1942-45 Jeep salad Last edited by Mike K; 03-06-25 at 03:03.
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Sold: GM shock absorber | BCA | For Sale Or Wanted | 2 | 17-02-18 20:45 |
| 19 set shock mounts ..... | Bob Carriere | The Wireless Forum | 25 | 30-09-14 07:01 |
| For Sale: 15 cwt shock rubbers | peter simundson | For Sale Or Wanted | 3 | 03-09-12 18:58 |
| Shock links | jason meade | The Softskin Forum | 23 | 23-12-11 16:15 |
| F8 Shock absorbers | david moore | The Softskin Forum | 2 | 01-09-05 12:13 |
Linear Mode
