|
|
|
|
#1
18-03-19, 07:13
|
||||
|
||||
Not truly a modern part but these are measurements from NOS felt seals used in the steering knuckles.
These are for the 6” ones but are the same for the 5” axles except in overall length. The length is 24-1/2”
__________________
Jordan Baker RHLI Museum, Otter LRC C15A-Wire3, 1944 Willys MB, 1942 10cwt Canadian trailer 
|
|
#2
18-03-19, 19:00
|
|||
|
|||
|
Felt Steering Ball Seals
Hi Jordan
Thanks, good information to add to CMP Knowledge Base. I've been using leather replacements since 1979 back then it was really hard to get information on CMPs. My first discussions with anybody who could answer questions was via regular mail. The first responses I got were from guys in Australia and New Zealand. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#3
17-11-19, 01:31
|
|||
|
|||
|
Transmission seal- Ford CMP
Good Day,
Here's another seal number that fits the Ford transmission rear seal to add to CR 21211 KOK brand Part No. TC 12167, rubber covered. They conveniently even give the dimensions embossed on the seal, in inches no less! KOK is a Taiwanese company so probably available worldwide. Cost $10 at the local bearing shop in Australia. Cheers,
__________________
F15-A 1942 Battery Staff Jacques Reed
|
 |
|
|
Hybrid Mode
