Wire-3 Fitted For Wireless Box details

[Jordan Baker]

Hi Bruce.

Thanks for the reply and giving some insight.

With your battery measurments I'm not sure two would fit on that try on the floor. It has that central rib and two pieces of angle iron on the end of it. I'm still scratching my head on what it could be for.

There was a C5 charging board mounted inside the truck. In post number 3, photo 2 you can see it along the front panel of the box mounted just to the left of the ws19. Also on the floor of the box is an oval hole. This was for the power cables from the Chorehorse to feed up to the charging board. In this picture you can see the hole in the floor just to the left of the table.

As for the terminal strips. I'd assume the truck would have some. I have my thoughts that they might be mounted on the wooden boards that are attached to the top bows. The two boards running along the sides have two sets of holes. In the pictures in the first couple of posts you can see two sets of two holes and there is definitely something mounted in them. What would be the length of the terminal strips?