New member of the Carrier Family

[marcel both]

Hi guys,thanks for all the information,with this information i will go to try to make some new parts for the accelerator rod.
Cheers

Marcel

[marcel both]

3 weeks ago i visit a military market here at the Netherlands and found a nice lot of carrier parts(the 2 red lead parts i recieve from Adrian Mamzer).
I had bought also a package of wooden strips what belongs at the edge of the upper hull of a MK1 carrier.
This weekend i open this package and found out that this wooden strips are signed with the year of manufacture and a CTL number.
The year of manufaturing 1942 what is on the wooden strips will be a nice match for my carrier.
Yesterday i start work on the Diff of my carrier,take off the front part of the Diff
what is between the Diff and the gearbox.
The seal what was on this part i had take a way because it was damaged/getting hard so it had a small oil leak.
So now i had to find a new seal what will be not so easy i think.

Cheers
Marcel

[Robert Bergeron]

Way to go Marcel ! Keep up the good work ! Robert

[marcel both]

Hi All
Here are some picture's of the seal that come from the part what is between the diif and the gearbox of my carrier.
Someone any idea where i can find some new one(name or number) or
some other seal what will nearly come to this one?

Cheers
Marcel

[Richard Farrant]

Originally Posted by marcel both

Hi All
Here are some picture's of the seal that come from the part what is between the diif and the gearbox of my carrier.
Someone any idea where i can find some new one(name or number) or
some other seal what will nearly come to this one?

Cheers
Marcel

Hi Marcel,
In England there are people who will make these seals, they are not a standard size. Try going to you local bearing shop and asking them, if not, the try this website;
www.jgelectronics.co.uk/oilsealuk/default.html
I recently had a Carrier owner from Canada asking about these seals and put him on to this business, Oil Seal UK. I have not dealt with them myself as I normally order through my local bearing shop.

regards, Richard

[marcel both]

Hi Richard
Thanks for fast reply, I have check this website and will contact this company.
if they can help me.

Regards ,
Marcel

[Michael R.]

This is a section of the Bulletin for the transmission/differential coupler seals. If you need an enlargement, send me an e-mail.

[Petr Brezina]

Originally Posted by marcel both

Hi All
Here are some picture's of the seal that come from the part what is between the diif and the gearbox of my carrier.
Someone any idea where i can find some new one(name or number) or
some other seal what will nearly come to this one?

Cheers
Marcel

Marcel, Im working on this issue too. When it will be fixed on my carrier, I let you know.

[marcel both]

This week i receive 2 seals that i had orderd for the drive coupling and for at the backside of the gearbox of my carrier.
Today i placed the big one at the drive coupling and fits perfect.
Also today work on the actuating rod and check the bearing support.
The balls of the bearing were very bad so replace new ones and replace everything after cleaning again and now it works perfect.

Cheers Marcel

[Jim Burrill]

Hi Marcel,
WHere did you order the new parts from?
Can you post the stock number/part number you used with the company you ordered them from?

I need to get the same things.

Thanks! Jim