New member of the Carrier Family

[marcel both]

Hi All
Here are some picture's of the seal that come from the part what is between the diif and the gearbox of my carrier.
Someone any idea where i can find some new one(name or number) or
some other seal what will nearly come to this one?

Cheers
Marcel

[Richard Farrant]

Originally Posted by marcel both

Hi All
Here are some picture's of the seal that come from the part what is between the diif and the gearbox of my carrier.
Someone any idea where i can find some new one(name or number) or
some other seal what will nearly come to this one?

Cheers
Marcel

Hi Marcel,
In England there are people who will make these seals, they are not a standard size. Try going to you local bearing shop and asking them, if not, the try this website;
www.jgelectronics.co.uk/oilsealuk/default.html
I recently had a Carrier owner from Canada asking about these seals and put him on to this business, Oil Seal UK. I have not dealt with them myself as I normally order through my local bearing shop.

regards, Richard

[marcel both]

Hi Richard
Thanks for fast reply, I have check this website and will contact this company.
if they can help me.

Regards ,
Marcel

[Michael R.]

This is a section of the Bulletin for the transmission/differential coupler seals. If you need an enlargement, send me an e-mail.

[marcel both]

Hi all
Here some question about some parts what is missing at my carrier.
I have to remake the parts what is at the photo's but without some information
about sizes,width,thickness it will be difficult for me.
So if some one can help me with a description of this parts(the strip what is
on top of the gearbox, need width,length and thickness) and the 2 parts what belongs to the seat for the radioman/third person on top of the feultank(need all sizes of this parts included the holes) or want to check this at his MK1 carrier and can make a description of this parts than it will be helpful for me.

Cheers

Marcel

[Michael R.]

The stiffener, CTL 13451. Material dimensions pending.

[marcel both]

Michael: thanks for this information of the missing part on my gearbox.

Last week i did some clean up/paint work of some parts of my carrier.
Even the small parts have to be done and will take a lot of time.

Marcel.

[Petr Brezina]

Originally Posted by marcel both

Hi All
Here are some picture's of the seal that come from the part what is between the diif and the gearbox of my carrier.
Someone any idea where i can find some new one(name or number) or
some other seal what will nearly come to this one?

Cheers
Marcel

Marcel, Im working on this issue too. When it will be fixed on my carrier, I let you know.

[marcel both]

This week i receive 2 seals that i had orderd for the drive coupling and for at the backside of the gearbox of my carrier.
Today i placed the big one at the drive coupling and fits perfect.
Also today work on the actuating rod and check the bearing support.
The balls of the bearing were very bad so replace new ones and replace everything after cleaning again and now it works perfect.

Cheers Marcel

[Jim Burrill]

Hi Marcel,
WHere did you order the new parts from?
Can you post the stock number/part number you used with the company you ordered them from?

I need to get the same things.

Thanks! Jim

[Petr Brezina]

They look very nice!

[marcel both]

Short update, since the last post do a lot of work of this (small) parts.
Takes a lot of time but by this way it starts to look a carrier again.
Cheers
Marcel

[marcel both]

Gearbox and differential almost finished.
Now started with the bottom of the hull.
I received from Simon Delaney a package
with parts as the ventilator boxes and
steps, adjustment parts for the tools at
the rear side.
Cheers
Marcel.

20170511_163656.jpg 20170511_163239.jpg 20170511_165744.jpg carrier001.jpg