A little light entertainment: 1939 Ford 1 ton Utility restoration

[jack neville]

The previous photos show the inner panel removed. The upright brackets whilst having been protected from the weather by that panel have disconnected at the bottom obviously having vibrated away from the mounts. They will be ok once I rebuild the damaged part. The bottom timber is mostly all rotted away but there is just enough to guess the timber sizes. The timber in the upper sections is still intact enough for patterns only. Whilst the side panels are badly knocked about they may be redeemable. The biggest problem with making entire new sides is the triple ribbed section at the top. Undecided at this stage as to how I will tackle that.