Quote:
Originally Posted by gary_bath_jr
I found 2 bolts that I took off (and have no clue where they came from), they each have a spring and use a cotter pin to keep the nut from coming off. I thought they were the bolts to hold the Cab to the frame, (front left and right) however when I look in my manual they use different bolts with no springs.
|
There were two methods of securing the front end of the cab. One used a set of tire carcass washers above, below and between the cab mount brackets. The other used bolts with springs and cotter pins, as you describe.
18-07-12, 12:23
Threaded Mode