|
|
#1
16-11-07, 11:36
|
|||
|
|||
Bracket studs
Hi Guys,
Is there anyone who can tell me where I can buy the 1/2" u n f studs that join the bracket together that surounds the rear axcel on a carrier,the bracket part number according to the workshop manual is 708 for either left or right side, its called bracket & cap assy are they available as new parts from anyone here in Australia? I require 8 of them. Thank you, Ron,
__________________
Ron Winfer 
|
|
#2
17-11-07, 06:27
|
||||
|
||||
|
Hi Ron, for the amount of time it might take to find them you might be just as well off getting a 1/2" unf die and make your own. I've done it quite a bit on 3168 and it certainly does save time. ( various sizes of course )
If you do, just use cutting paste and take your time. She'll be right. Colin.
|
|
#3
17-11-07, 06:41
|
|||
|
|||
|
Bracket bolts
Hi Colin/
Thanks mate I have just got home with a fist full of 1/2" Hi tensile bolts and plan to cut the heads off and extend the thread along the rest of the bolt. I was hoping to take the easy way out and just buy some, I must be getting lazy after all its only a bit of time really. Thanks for the suggestion keep us informed on your various projects, Regards, Ron,
__________________
Ron Winfer
|
|
#4
17-11-07, 13:28
|
||||
|
||||
|
Carrier
Ron, have sent a reply to your PM. Check your in box.
Good luck with it all. CHEERS IAN
|
 |
|
|
Linear Mode
