Morris Commercial CD/SW L.A.D. Help! - Page 2

Stefano Ruggeri · #31 29-11-05, 01:25

Les,
Thanks alot for the photos, first time I've ever seen what goes in the back!

Many thanks again, I appreciate it

Hanno Spoelstra · #32 03-12-05, 15:57

Three more pics of a 1940 30cwt Morris CDSW 6x4 Light Recovery Vehicle:
http://www.ianhardy.net/gallery/milv001/crw_4077l_std
http://www.ianhardy.net/gallery/milv001/crw_4032l_std
http://www.ianhardy.net/gallery/dli03/CRW_2230

Stefano Ruggeri · #33 04-12-05, 17:50

Quote:

Originally posted by Hanno Spoelstra
Three more pics of a 1940 30cwt Morris CDSW 6x4 Light Recovery Vehicle:

Thanks Hanno, it would seem that there are more of these lorries around than I thought. The nice man at the REME museum told me that the majority of the survivors come from Ireland, I wonder why? Out here in Italy the six cylinder morris engine was not very highly regarded apparently, and those vehicles sold on to the civilian market were scrapped very soon after the war. The engine on mine died because the hot spot on the inlet manifold had corroded which led to a holed piston, and this happened whilst it was still in sevice with the Italian army. I wonder if this was a common failing....

Thanks again,
Stef

Hanno Spoelstra · #34 05-12-05, 10:33

Quote:

Originally posted by Stefano Ruggeri
The nice man at the REME museum told me that the majority of the survivors come from Ireland, I wonder why?

Well, basically because the Irish Defence Forces use their equipment for a long time. They had four Leyland Retrievers in service from 1939 to 1979! The National Transport Museum of Ireland also has an "Army Morris CDSW 3-axle Gun Tractor 1939" on stock.
Also because the Irish took good such good care of them during some 50 years, we now have two Landsverk L180 armoured cars preserved in Holland.

H.

Bruce Parker (RIP) · #35 05-12-05, 14:16

I like Morris's as much as the next guy, but way back you promised Fox pictures!!

I'd very much like to see these if possible...

Bruce

Stefano Ruggeri · #36 06-12-05, 00:14

Quote:

Originally posted by Bruce Parker
I like Morris's as much as the next guy, but way back you promised Fox pictures!!

I'd very much like to see these if possible...

Bruce

Ooops... Will do

Alex van de Wetering · #37 06-12-05, 12:30

Hi Stefano,

There is another fully restored Morris CD/SW Light Breakdown in the Military vehicle museum in Newcastle upon tyne in Great Britain. I am not sure if it is one of the tractors pictured in this tread allready.

I do have some pictures of this one, but I have to look on my old computer.

Good luck with your Morris's!

Alex, The Netherlands

Stefano Ruggeri · #38 13-11-06, 01:13

Quote:

Originally posted by Stefano Ruggeri
Ooops... Will do

After an age, here are a couple of photos of the Fox, taken in April when we were at Florence

Stefano Ruggeri · #39 13-11-06, 01:18

another..

Stefano Ruggeri · #40 13-11-06, 01:23

and yet another!

all the best

T17E1 · #41 17-02-08, 22:37

Hi Stefano,

I have recently bought a CDSW LAD and a CDFW along with a pile of spares. Let me know if I can help. I am hoping to bring her to Beltring this year. She is very complete and original even down to the tools and equipment which includes the tyre overchains.

Best regards

lynx42 · #42 17-02-08, 22:55

Mike Kelly, Do you know of the TL37 in your area? There's one near Drouin owned by a bloke called Alan.Haven't seen it but have seen photo's.

Stefano Ruggeri · #43 17-02-08, 23:37

Quote:

Originally Posted by T17E1

I have recently bought a CDSW LAD and a CDFW along with a pile of spares. Let me know if I can help. I am hoping to bring her to Beltring this year. She is very complete and original even down to the tools and equipment which includes the tyre overchains.

Torbin,

Rory told me that there were two morrises for sale but I 'phoned late (blimey, even the overchains...

). Please let me know if you've got bits you want to sell. I'm still doing the engine (was in a field for thirty years with the head off...

) - gearbox and winch next...
Cheers,
Stefano

T17E1 · #44 02-03-08, 16:42

Hi Guys, Does anyone know where I might find a water pump or water pump rebuild kit for my CDSW?
Regds Tobin

Stefano Ruggeri · #45 02-03-08, 22:45

Quote:

Originally Posted by T17E1

Hi Guys, Does anyone know where I might find a water pump or water pump rebuild kit for my CDSW?
Regds Tobin

Torbin,
Try E.P. Services (Tel. 01902 452914). All they do are water pumps, and they did a great job on mine.
Cheers,
Stef

Mike K · #46 03-03-08, 10:28

Quote:

Originally Posted by Stefano Ruggeri

Torbin,
Try E.P. Services (Tel. 01902 452914). All they do are water pumps, and they did a great job on mine.
Cheers,
Stef

The two ball bearings are bog standard off the shelf types . The rear bearing is different to the front . I managed to rebuild a OH pump here using a seal from something else . I ended up using two of the front bearings ( cheaper ) and modified something .. cant remember what i did !

Ah yes ,It's on my website :

http://www.geocities.com/vk3cz/Waterpump.html

Mike

T17E1 · #47 15-03-08, 01:57

Hi Larry, Thats my truck!!! I bought it recently from a guy in Wiltshire along with a CDFW. She is a bit sorry having been in dry storage for probably 20 years but I got her running at the weekend, albeit on five cyliders due to a worn out dizzy cap. Same paintwork and everything!!. T Jones. e-mail

T17E1 · #48 15-03-08, 02:02

Hi Stef,
I have all the stowage drawings for the CDSW and handbook and spare parts books. Do you need copies?
Tobin

Les Freathy · #49 07-04-08, 22:50

Hi Stef

Found a couple more views of the breakdown truck, trust the restoration is moving along Ok
cheers
Les

Stefano Ruggeri · #50 14-04-08, 00:15

Quote:

Originally Posted by T17E1

I have all the stowage drawings for the CDSW and handbook and spare parts books. Do you need copies?

Tobin,

Just saw you post now

I've got the handbook and spare parts catalogue (that would be more useful if it had illustrations it must be said...), but I would love the stowage drawings

Les, I'll post a few pics of the engine soon.

thanks all,

Stef

T17E1 · #51 14-05-08, 23:23

Hi Richard, Have you a commercial name for the axle lubricant. I have a spare axle and dif if you need one. Best regards. Tobin. tob@tj44.demon.co.uk

#52 15-05-08, 02:11

Quote:

Originally Posted by Alex van de Wetering

Hi Stefano,

There is another fully restored Morris CD/SW Light Breakdown in the Military vehicle museum in Newcastle upon tyne in Great Britain.

I think I know that one, it is "stored" in the museum but privately owned.

I have seen this up close and followed it to the private "home" with young Rory Ballard as its passenger, its largely original but we'd both agree "restored" is perhaps a bit to strong. The engine needs some serious work too. . . .

R.

#53 15-05-08, 02:24

Quote:

Originally Posted by T17E1

Hi Richard, Have you a commercial name for the axle lubricant. I have a spare axle and dif if you need one. Best regards. Tobin. tob@tj44.demon.co.uk

Probably the wrong Richard, however, if you refer to the diffs than its SAE140 gear oil to GL1 spec.

The use of EP or Hypoid gear oils will eat the bronze crown wheels of these worm drive diffs.

Its not uncommon to find these bolted-up bronze crown wheels missing, the REME museum example at Bordon here is just such, they obviously fetched a good price once upon a time with the scrap man; it is a big chunk of bronze.

Driving one axle of a CDSW is a bit of a disaster since the axle linkages have the effect of lifting the driving wheels and applying more down load to the non-driving set, not a problem when both axles are driven as it balances itself and aids cross-country mobility as designed, however with only one driven, a slight slope on wet grass can defeat it as I have witnessed.

R.