|
|
#31
13-03-07, 12:33
|
||||
|
||||
Re: Headlight ring not brass
Quote:
Another "FORD" front shell (showing the headlight bucket screws are not symmetrical, so you can't put the headlights in upside down): 
|
|
#32
18-03-07, 13:19
|
||||
|
||||
|
Headlight rings?
Thanks Tony,
Any chance of a picture of the brass variety rings? I suspect they were just left that way (non Chromed) from a 38-42 Ford Truck. Gee Would not be bad to see the rest of your truck now either! Looks like you are making better progress than me. Ian
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff
|
|
#33
27-03-07, 12:07
|
||||
|
||||
|
An interesting shot showing an Australian modification to a Blitz seat (may be for Ford OR Chev). This shows the bit of tube stock welded in at the top to widen the seat back.
|
|
#34
27-03-07, 12:37
|
||||
|
||||
|
The Australian Chev roof hatch. Note that the top of the cab roof is raised around the base of the roof hatch. Note also the Canadian pattern grab handle. I believe the Canadian roof hatch is supported by timber on the cab roof.
|
|
#35
27-03-07, 12:42
|
||||
|
||||
|
In comparison, here's a shot from inside the open roof hatch on an Australian Ford. Note the dual grab handles fitted in lieu of the Canadian pattern one as seen on the Chev. These dual handles were also fitted to modified conventional vehicles in Australia.
|
|
#36
27-03-07, 12:46
|
||||
|
||||
|
This is the roof hatch of the same Ford in the open position. Note the loop handle on the inside, the stamping pattern and the butterfly latch to hold it in the open position. Missing from this example, though, is the latch which holds it shut (holes for it visible to the right of the butterfly latch).
|
|
#37
29-03-07, 03:04
|
||||
|
||||
|
Re: Headlight rings?
Quote:
I have sandblasted these rings, then primed them with POR15 to stick to the Brass, then they will be painted to match the truck.
|
|
#38
29-03-07, 13:34
|
||||
|
||||
|
The Brass rings were plated in Nickel, which was then painted over with body colour G
Tony,
I like your work.. they are super straight rings.. mine dont look like that.. a botched job from Dubbo. Please, if you have time e-mail me pics of your truck. For Max, do you have a spare Ford hatch, just lying in the 10, 000 acre hay farm? I know someone who would use it right away. Also I noticed that Chevs have insulation in/on the engine bay.. looks like asbestos stuff.... but I am leaving that for someone else to discover. Ian
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff
|
|
#39
29-03-07, 13:51
|
||||
|
||||
|
rim
Ian I have a 16 inch rim for you and maybe a head light ring
|
|
#40
04-04-07, 05:13
|
||||
|
||||
|
floor
This typr of floor is used in fords in australia, I believe it's railway plate used by railway during the ,war we do see some fords with canadian checker plate in them from time to time.
Max
|
|
#41
04-04-07, 13:19
|
||||
|
||||
|
Ring & rim
Max you are a nice bloke.
I could do with a rim & ring. This being Easter and all, I could go a cuppa at your place in Yass. I would be very privelledged to have one and enjoy your hospitality.. DO I need to bring anything? A full day's labour? I can bring a tea cake if you like. Ian.
__________________
Ian Williams F15A, 2x Army Land Rover 88' sIIA's GPW Other stuff Last edited by sth65pac; 04-04-07 at 13:31.
|
|
#42
04-04-07, 20:14
|
||||
|
||||
|
Re: Ring & rim
Quote:
__________________
Swiss Chris aka Christoph Zimmerli - Driving Switzerland's only Aussie F15 www.wheelsandtracks.com >> Condor A580 M+85691 (1952), Swiss Army Motorbike (unrestored) >> F15 1942 Aust (Cab 13) ::: restored by Keefy
|
|
#43
04-04-07, 23:28
|
||||
|
||||
|
Re: Ring & rim
Quote:
Max
|
|
#44
12-04-07, 13:11
|
||||
|
||||
|
Sun Visor
Hi All
This is probably not in the "Difference" category but was fitted to our late ambulance. Ambo is sold to finance and make room in the shed for Project Phoenix. Bob
|
|
#45
12-04-07, 13:14
|
||||
|
||||
|
Of course it was a FORD Blitz ambulance
|
|
#46
17-04-07, 00:09
|
||||
|
||||
|
Bob you don't see many sun visors left in tack these days.
just a couple photos of steps used
|
|
#47
17-04-07, 00:21
|
||||
|
||||
|
step
I have seen this type on early fords and then in 13 cabs I have seen it on both ford and chev
Max
|
|
#48
04-05-07, 11:52
|
||||
|
||||
|
light switch
chev diff light switch located on the chassie near the rear on the right side
|
|
#49
04-05-07, 11:57
|
||||
|
||||
|
ford switch
Ford diff light switch, it's located at the rear in the chassie rail on the right. I haven't seen many ford ones still intact
Max
|
|
#50
24-01-08, 11:40
|
||||
|
||||
|
Another Difference
Hi all
Whilst restoring some panels the other day I remembered this thread. Here is a difference that most would not be aware of, namely the gauges and speedometer holding screws. As can be seen from the attached image there are ordinary headed and round headed screws. The ordinary ones hold in the gauges with the longer being Ford with the shorter being Chevrolet. The same with the round headed ones that hold in the speedometers, the longer being Ford with the shorter being Chevrolet. Although not being much difference in length, just imagine the savings in metal Chevrolet made when you translate the difference over millions of screws.  Bob
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com
|
|
#51
25-01-08, 06:07
|
|||
|
|||
|
Fords are "longer"
Hi bob,
Interesting tid bit. Now I don't want to go too far off track with this but are you saying that in comparing Fords to Chevs... If someone was in the market for a long screw  they should talk with a Ford owner rather than the common Chevy owner  Mike in Windsor
|
|
#52
25-01-08, 06:42
|
||||
|
||||
|
Re: Fords are "longer"
Quote:
   
__________________
Film maker 42 FGT No8 (Aust) remains 42 FGT No9 (Aust) 42 F15 Keith Webb Macleod, Victoria Australia Also Canadian Military Pattern Vehicles group on Facebook https://www.facebook.com/groups/canadianmilitarypattern
|
|
#53
25-01-08, 12:28
|
||||
|
||||
|
Mike
A Ford owner will give you a far better screw whereas Chev owners only give you half a screw.  Bob
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com
|
|
#56
27-01-08, 20:15
|
||||
|
||||
|
Re: Re: Re: Fords are "longer"
Quote:
__________________
Regards, Hanno --------------------------
|
 |
|
|
Linear Mode
