![]() |
#2
|
|||
|
|||
![]()
Rolf - Not sure which seats you mean the middle bench seat with built in tool storage or the rear most seats which are the same as the front seats. Attached is a photo of my middle seat, which is bolted to the floor with 1/4 inch bolts there are captive nuts under the floor. Originally the seats were held down by wing-nut bolt shown in primer paint these were retained with a short chain. The one shown is the only one that survived on my truck I have used grade 8 bolts as replacements.
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com |
|
|