Otter LRC CM4647296 comes home

[Jordan Baker]

The starter push button is next up. Again this one was carefully and fully disassembled. It was quite full of rust and fire extinguisher sand. The metal parts were vapour blasted. There was too small springs, one under the brass contact and the other behind the button. Both spent over night in a rust eating solution. It wasn’t Evaporust but something similar. The body was given a zinc plating and the push button and outer retaining nut nickel plating. I still need to get the terminal screws out but they were seized. I don’t want to break the fibre board. So I’ll see how an overnight soak in the anti rust stuff helps.