View Port dimensions needed

[Lynn Eades]

Seb, I suggest you travel to a carrier somewhere and take patterns yourself. For everything to work well and fit well, you need a pattern that accurately details the ports and all the associated bolt holes. (unless someone can share proven cad drawings)

[Seb Meloche]

Originally Posted by Lynn Eades

Seb, I suggest you travel to a carrier somewhere and take patterns yourself. For everything to work well and fit well, you need a pattern that accurately details the ports and all the associated bolt holes. (unless someone can share proven cad drawings)

The closest Carrier to me that I know of would be a 9hr drive one way and it’s in a museum which would require other hassles. Add fuel and hotels to the cost plus the 2 days off of work makes it unfeasible. I already have the drawings and measurements for all the plates with rivet hole locations.
All I need is the port measurements. I’m sure I can replicate them within a MM or two with the help of someone.

[George Moore]

This may help, sorry the drawing is small.

George

[Dave Schindel]

the bsst would be if someone could copy/draw a template on paper and then just mail it to you. That way you don't have to measure everything , just transfer directly to your metal. I would do it myself but mine are not original.

[Al Dornan]

I have sent Seb what he needed.