CMP Fender to body joins

[Ganmain Tony]

Bruce,

I do realise you asked what was the original material that went between the guards.

I believe MAC's have a reproduction of what we call P Channel.

I got some from the local rubber store in Wagga. But it is completely rubber and has no cord running through it. (The original bits I found when dismantling the F15 did have a rope/cord in them)

I can take a picture and post it here if it helps.

[Bruce Parker (RIP)]

Originally Posted by Ganmain Tony

Bruce,

I do realise you asked what was the original material that went between the guards.

I believe MAC's have a reproduction of what we call P Channel.

I got some from the local rubber store in Wagga. But it is completely rubber and has no cord running through it. (The original bits I found when dismantling the F15 did have a rope/cord in them)

I can take a picture and post it here if it helps.

That would be great. Original is nice, but finding something that looks the part and does the job works too.

[rob love]

I have always made the fender welting with canvas and rubber cord. A welting foot on the sewing machine lets you get the cord sewn in nice and tight. Then I spray the whole thing with asphalt undercoating from a can. I do the same with cotton webbing I use for fuel tank brackets. Without the asphalt, the webbing just soaks up the water and ensures, combines with any rubbing action of the area, rust.



You will want to make sure the fenders are painted with a tough and waterproof coating like POR-15. I have seen many otherwise perfect fenders with pinhole rust through and severe pitting where the antisqueek welting was. That said, done right, it will likely outlive you.

[Bruce Parker (RIP)]

Rob, thanks for the asphalt undercoating idea. I like it and was wondering what to impregnate all my roof fiber seals with.

[Phil Waterman]

Hi Bruce


My 1945 HUP had the fender welt as used on cars of the 30s basically oil cloth folded over a bead of jut rope. But it all so had about 2" wide fabric impregnated with with either tar or cosmoline.


I bough the fender welt over the year but I have also made in out of good grade oil cloth, folding it and sewing in hard cloths line rope. Both have stood up well, but then again my trucks now live indoors so rust has not been as much of a problem in the second half of their lives as the first.


Cheers Phil

[Bruce Parker (RIP)]

Originally Posted by Phil Waterman

Hi Bruce


My 1945 HUP had the fender welt as used on cars of the 30s basically oil cloth folded over a bead of jut rope. But it all so had about 2" wide fabric impregnated with with either tar or cosmoline.

Thanks Phil, but can you clarify your comment above? Did it have the bead and the 2" oil cloth or different fenders (or trucks) having the just the oil cloth or the bead? Or was it the bead folded over making a 2" width?

[Owen Evans]

Not fenders, but if it helps at all, here's some photos of the different types of material (or remains of) from an NOS front shell for the 11 cab. I guess the 'fabric' type would be used on the 13 cabs, when rubber became harder to obtain? Note the black residue (tar?) used to seal the fabric type to the metal.....note also that the fabric has a textured outer finish, similar to the 'grained' products listed here:

https://www.vintagecarparts.co.uk/se...ry=Wing+Piping

Owen.