Ford Model E01A (was: US Staff Car?)

[Tony Smith]

Originally Posted by Hanno Spoelstra

Now, some questions remain:

1. What modifications were carried out to fit the 13" wheels? I reckon the drum brakes were different from the regular ones with 16"wheels. Was the suspension beefed up, and/or heavier axles fitted?

I don't think they were different on these cars.

The 1940 brake drums (both front and rear) have a significant offset that would permit fitting a 13" rim, particularly if it had a negative offset like the Bofors 13" rim..

There is a Canadian stock part number, C11A-1015, for a 13" X 6 1/2" wheel that fits the regular 5 on 5 1/2 lug pattern of standard cars, but I am not 100% sure if that is these rims in the pictures without seeing a picture. I'd be 90% sure.

Of course, the other Ford Car Chassis-based vehicle with 13" wheels is the C11ADF. While this might seem to be the logical vehicle for C11A wheels, the C11ADF had heavier-duty 6 lug wheels that were shared with F8 CMP. Being 6 lug, these are definitely NOT C11A-1015 rims. So that leaves the C11A-1015 rims as the ones used on the E01A.