MLU FORUM  

Go Back   MLU FORUM > MILITARY VEHICLES > The Restoration Forum

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-01-21, 17:43
Mike Cecil Mike Cecil is offline
Registered User
 
Join Date: Jun 2006
Location: Cody, Wyoming, USA
Posts: 2,379
Default Caustic Soda

I agree with Jesse, although I call it caustic soda and don't bother heating the drum. I have a 44 gall drum of water, at room temp (no lower than 50F in winter), with about a 2 lb container of caustic soda dissolved in it. I leave the parts hanging from a support into the solution for about 4 to 5 days, then wash off in clean water rubbing with a scouring pad. When the paint removal gets sluggish time-wise, I add more caustic. The drum is clearly labelled 'DANGER CAUSTIC SODA', has a lid, and I use chemical handling gloves and eye protection when moving parts in or out of the drum. Most hardware stores stock caustic soda. I do not immerse parts that have internal spaces without access, like the side handles on a jeep: the caustic gets inside and is REALLY difficult to neutralise. When the handle heats up, the stuff bubbles out of the joints/pressed together ends: not good!

For parts caked in grease, I manually remove the excess with a scraper, then wash off in a tub with a small amount of thinners and a scrubbing brush - less volatile than petrol, but works almost as well. The used thinners goes into a plastic bottle. After a few days, all the crud has fallen to the bottom and you can de-cant the thinners from the top into another bottle to use again for cleaning. (I use a very small amount of petrol for any really difficult removal, and it gets discarded when finished.)

Then into the caustic bath to remove any paint.

Then, when dry, sand blast or wire brush ready for primer paint.

Mike
Reply With Quote
  #2  
Old 03-01-21, 19:02
Harry Moon Harry Moon is offline
Registered User
 
Join Date: Feb 2003
Location: Burnaby B.C. Canada
Posts: 1,127
Default Paint thinner

I switched to paint thinner a few years ago and now use it all the time.
Reply With Quote
  #3  
Old 03-01-21, 22:37
Michael R. Michael R. is offline
Registered User
 
Join Date: Jun 2011
Location: Canada
Posts: 1,171
Default camping naphtha

...” having been in the military for 25 years camping is not my idea of recreation.”


Happy New Year to all. Thanks for the subtle humour that never fails to bring a smile, Mr. Love.
Reply With Quote
  #4  
Old 04-01-21, 02:03
Mike K's Avatar
Mike K Mike K is offline
Fan of Lord Nuffield
 
Join Date: Feb 2003
Location: Victoria, Australia
Posts: 5,910
Default Immersion burner ?

Is it this device https://www.hnw.com.au/product-range...-tank-heating/

If you have a large item to clean in your caustic solution , or some other chemical , Citric acid or whatever. I recently discovered the larger dairy farmers use 1000 liter tubs, the tubs contain cleaning agents for the farm. I got one for $40 . Not sure if these are available world wide but these things are usually a standard item https://www.ebay.com.au/i/2032213923...CABEgKRkfD_BwE
__________________
1940 cab 11 C8
1940 Morris-Commercial PU
1941 Morris-Commercial CS8
1940 Chev. 15cwt GS Van ( Aust.)
1942-45 Jeep salad
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Canadian Air Force Wheeled Power Washer Ian Johns For Sale Or Wanted 0 05-05-16 19:38
For Sale: U.C. radiator cap gasket and washer sets Michael R. For Sale Or Wanted 5 06-04-16 15:00
F15A Front Axle Washer Eric Szalanda The Restoration Forum 12 04-02-13 16:13
Scorpion Pressure Washer ozm29c The Sergeants' Mess 2 03-01-11 04:01
front bogie washer question Rob Dyba The Carrier Forum 2 07-09-06 08:02


All times are GMT +2. The time now is 19:03.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016