Unknown tail light bracket

[Jordan Baker]

Trying to ID what vehicle this bracket was used on. It fits two of the standard CMP side marker/tail/stop lights. The white/red tags look like the same style as used on the Mk2 Universal Carrier. There is no other markings on it at all.

Any help would be most appreciated.

[Tony Wheeler]

Originally Posted by Jordan Baker

The white/red tags look like the same style as used on the Mk2 Universal Carrier.

same same CMP Jordan. Never seen this part before but it's obviously designed for pre-existing hole pattern, which points to chassis frame somewhere - perhaps CMP rear crossmember? Should be possible to ID by hole centre measurement.

[Keith Webb]

Yours looks like a redback spider's nest Tony!

Originally Posted by Tony Wheeler

same same CMP Jordan. Never seen this part before but it's obviously designed for pre-existing hole pattern, which points to chassis frame somewhere - perhaps CMP rear crossmember? Should be possible to ID by hole centre measurement.

Attachment 79596

[Tony Wheeler]

Originally Posted by Keith Webb

Yours looks like a redback spider's nest Tony!

Very likely Keith - best not to disturb!

[Brian Gough]

BTT - anyone know ??

[Tony Wheeler]

Originally Posted by Brian Gough

anyone know ??

Still waiting on measurement (see my post above)

[Brian Gough]

Hi Tony,

The hole center difference is 3 3/4" or 95mm.

Brian

[Brian Gough]

See picture in post #1. Anyone know ?

Brian

[Brian Gough]

bump -

See picture in post #1. anyone? any ideas?

Brian

[Stefan Leegwater]

Hi Brian,

I have the same bracket (see picture), unfortunately without part numbers,
I have a bracket with the same kind of mounting and excactly the same hole center distance, but a different style for lights.
It has the part number C11AS-13470 on its, which directs to a car or utlity vehicle on a 114 inch wheelbase.

Hope this helps a bit.

Have a good flight!

Stefan