Canadian Centurion tanks intercom system?

[David Wilkinson]

I was a crew commander in the Centurion Mk11 in germany from 69 to 72. The Centurion always had the Brit IC which was used with the C42 family of radios. They integrated the American family of radios (46/25 sets) with the Brit harness at the JD9, I believe. It worked great and in my opinion was superior to the US IC which I had as a Leo C1 CC 10 years later.

[jdmcm]

David

so did the Leo have US style radios and IC's installed from the start? I want to install a IC' in our Centurion, currently it has no radio, it does have some British IC boxes but how I would go about integrating components looks a little beyond me so I was trying to pick a system that would be simple and readily available. Obviously the drivers station has to go through the RBJ

John

[jdmcm]

David

would the Centurions in Canada also have used British Radio systems? I guess what I'm asking is, what would be the correct radio set for a Mk5 Centurion stationed in Canada?

John

[rob love]

The C42 was a pretty standard radio for the army in Canada starting, I believe, in the late 50s. In the early 70s, the US radios started to appear for the regular army, but a lot of the reserves continued to use the C42 radio until about 1980.

I have the equipment logistic directives at work for the Centurion. I am pretty sure it had information on which radios were used. I'll check tomorrow and post the results here if someone doesn't beat me to it.

While you don't see sales of the C42s that often these days, a big part of the reason, likely, is because they are so darn huge and heavy. Most guys don't want them in their jeeps. But they are out there, hiding in sheds and warehouses.

[eddy8men]

john i reckon your cent was set up for clansman

[eddy8men]

if you just want comms between driver and commander then motorbike comms set up will work well and is cheap and readily available

[jdmcm]

That makes sense Rick, I do plan to add a Canadian era correct radio, but it would sure be handy to have some comms especially rolling around a movie set!

[Dan Martel]

Originally Posted by David Wilkinson

...at the JD9...

Originally Posted by jdmcm

Obviously the drivers station has to go through the RBJ.

JD9 and RBJ? Please remember that there are some less acronym-ically minded members reading your posts too.

Thanks,
Dan.

[David Herbert]

JD9 is the 9th variant of a "junction distribution" box. Basically a router for the radios and intercom (IC) system.
RBJ is the "rotary base junction" which is the unit in the bottom of the turret which connects the electrical services including radio and intercom between the rotating turret and the stationary hull. It contains a lot of copper slip rings and carbon brushes and is the limiting factor of how many radio functions can be routed between the hull and the turret. In WW2 British tanks that had hydraulic turret traverse powered from an engine driven pump the hydraulic circuit went via the RBJ too, making it even more complicated.

David

[Dan Martel]

Originally Posted by David Herbert

JD9 is the 9th variant of a "junction distribution" box.

RBJ is the "rotary base junction."

Great response. Thanks very much.

Dan.

[David Wilkinson]

Sorry I was off for a while. Good info here. In the regular army, the US family of radios replaced the Brit C42 in the middle 60's. In most vehicle installations, except the Centurion, the American harness was used. This included the Ferret. Only in the Centurion was the total Brit harness retained till the Centurion was withdrawn from service. The junction between the US radio system and the Brit harness was done at the JD9. So all Canadian Centurions retained all the original junction boxes and wiring, headsets and handsets, tanoy microphone, IT telephone and reels cable with the green hornet hand set.

[David Wilkinson]

In addition. Gun tanks were equipped with 1 x 46 set (A) and 1 x 25 set (B) which could be quickly dismounted to use as a man pack. Command tanks had 2 x 46 sets plus a UHF man pack (can't remember the name) for ground air comms.
Most command tanks were equipped with the Canadian NavAid. I had one for three years and it never worked.