|
|
#1
02-11-17, 15:57
|
|||
|
|||
Bofors Gun help
can anyone tell me what the purpose of this is please, on the side of a 1943 Bofors gun. I can not find it in the manual..
many thanks Brad 
|
|
#3
02-11-17, 19:26
|
|||
|
|||
|
on the right side of the receiver just near to the extraction external lever which is in the photo bottom right. Its underneath the gun ID brass plaque.
|
|
#4
02-11-17, 19:45
|
||||
|
||||
|
loosen the screws and slide it...is there a hole behind?
__________________
Charles Fitton Maryhill On., Canada too many carriers too many rovers not enough time. (and now a BSA...) (and now a Triumph TRW...)
|
|
#5
02-11-17, 20:12
|
|||
|
|||
|
Yes, loosened screws and slid it.... and a hole appears....
|
|
#7
02-11-17, 21:03
|
|||
|
|||
|
Heres a few photos, i can get clearer ones if needed tommorrow as its pitch black in the barn. Its on the main gun body on the right side (standing behind it) just under the ID plate. The other user was right... if i slide it there is a hole underneath.. These photos taken from the top side, barrel goes directly out infront of me. You can just see the extractor claw release external lever in these photos.
Brad
|
|
#8
02-11-17, 21:06
|
|||
|
|||
|
That's the cover over the extractor spindle.
__________________
Adrian Barrell
|
|
#9
02-11-17, 21:10
|
|||
|
|||
|
Is it simply to remove the spindle? what do the letters mean?
|
|
#12
03-11-17, 21:34
|
|||
|
|||
|
Thats interesting, But if its just a cover then why not be plain and look like a cover..? why all the holes , letters, and the slot?
|
|
#13
03-11-17, 22:11
|
|||
|
|||
|
From the handbook.
The right side, near the front and at the bottom, is bored and bushed to form a bearing for an outer releasing lever for the extractor, and with two holes, the front one to facilitate removing the extractor spindle, the rear one to admit a closing spring setting tool and removal of the crank shaft; the two holes are closed by a cover secured to the casing by two screws which enter a slot in the cover; the cover has lateral movement to expose the holes. I wonder if your gun is from a non English speaking user and the M and S stand for that.
__________________
Adrian Barrell
|
|
#14
03-11-17, 23:54
|
|||
|
|||
|
A wild guess would be 'Maintenance' and 'Service' positions for the cover plate.
Though the letters are not mentioned in the handbook surely the overhaul manual will reference them. David
__________________
Hell no! I'm not that old! Last edited by motto; 04-11-17 at 00:10.
|
|
#15
04-11-17, 10:41
|
|||
|
|||
|
We are getting there, The gun is Canadian, I have five bofors guns and one has a plaque stating made in Canada, and this one has the cover as well. I have a manual, I will try to find it again in the manual now I have an idea what to look for...
|
|
#16
04-11-17, 10:58
|
|||
|
|||
|
It's on page 41 of that handbook.
__________________
Adrian Barrell
|
|
#17
04-11-17, 11:37
|
|||
|
|||
|
found it, looks like its just a slide cover....
On a slight side line... That handbook Ive got is missing a few of the coloured plates at the rear, plates 2 to 5, 8, 9, and 43. Id be happy to pay for copies, A large photocopier or even a photo of each missing plate would be great. Brad can you help me out with copies Adrian?
|
|
#18
04-11-17, 13:01
|
|||
|
|||
|
No problem Brad, pm me your email and I'll send them on.
__________________
Adrian Barrell
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bofors | JBizal | For Sale Or Wanted | 11 | 03-09-11 05:27 |
| 40 mm Bofors | Mike Timoshyk | For Sale Or Wanted | 5 | 21-01-09 07:26 |
| Bofors 75 mm AA Gun | Stellan Bojerud (RIP) | The Gun Park | 3 | 02-11-07 13:40 |
| WTB: Bofors trailer for M3 Bofors gun mount | daninnm | The Gun Park | 0 | 23-10-07 03:09 |
| Bofors C9/B | Paul Ramsden | The Gun Park | 9 | 02-07-06 17:23 |
Linear Mode
