Getting Restoration Bren carrier MK2

[Michael R.]

On some housings, the bolt head of the locking bolt has deteriorated making it difficult to locate and remove. In FUC-03 the locking bolt is reported as not replaced after the 1940 design.

[Israel Berko]

hi Michael
thanks for info i will check it on friday if we have this modification

BR
Israel

[Lynn Eades]

For those who have a shaft or housing that is too rough to take a std. bearing arrangement, I have turned up a Nyloil (an industrial plastic) bush to fit and fill the housing. I have drilled and grooved it so that grease can enter it in the original way. So far it appears to work fine.

[Israel Berko]

We worked on the Housing - bearing - contro1 - change speed CTL 16568 T
and we found out it is in a very bad condition
Anyone know how we can find/order it, who sale it? (Complete with the special bearing and Cap)

[Israel Berko]

We also checked the Shaft - steering control CTL 12000 and Lever - actuating contro1 CTL 2865.
The last thing was to rebuild the C01UC 105074 LEAF AND ANCHOR ASSEMBLY - ACCELERATOR SPRING, and Leaf - spring - intermediate and Leaf - spring - short CTL 7102 and CTL 7104 it was made from old wood saw (offered by Paul Dutton) Paul Thanks

[Israel Berko]

we did a few steps on our BC

we worked on the Steering / Brake Control system20170901_121721.jpg

20170901_123034.jpg

[Israel Berko]

made from old wood saw
20170901_121820.jpg

20170901_121824.jpg