LP2 VR 2225 Build

[Andrew Rowe]

Hi Dale, I take it you have noticed this with your drum off, which probably to get the drum off the shoes have been slackened back?, so with drum on and adjusted right, there should be positive "feel" Make sure you centralise the shoes first and then adjust the top and then maybe back to the bottom to readjust the centralising of the shoes and then back to the top again for clearance. I have my drums machined and the shoes radius so they are exact. This is why some carriers get a poor reputation for handling because the brakes are not properly set up . My carrier could idle around in it,s own length, and obviously when you run your carrier and they get hot , you also have to make sure you are not too tight on your clearance between drum and shoe. There is no place for a feeler gauge like jeeps have, that they use to check your clearance, it is all done by "feel". Cheers Andrew.