|
|
#10
23-12-16, 01:13
|
|||
|
|||
So i set the plugs to 40 and reinstalled. I then hooked up a vac gauge
and got 18 inches at 1000 rpm but only 6 at idle. The minute I hooked up the vac gauge to the carb the idle seemed to smooth out. I put a different brASS fitting into the carb for the vac line and hooked it up to the distributor..seems to idle nice. It had a slight bog when doing a gentle rev up from 500rpm to 1000rpm, so I retarded the timing and that got better. The engine runs very nice now not really sure why as I still only have poor vac at idle. The vacuum did not change by adusting the timing?? 
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problem with Canadianmilitarypattern.com | Phil Waterman | The Sergeants' Mess | 6 | 31-01-15 14:08 |
| Idle adjustment screw for M38 carb needed | greg anderson (RIP) | For Sale Or Wanted | 3 | 30-09-10 17:37 |
| Having a problem with the Search | Phil Waterman | TAC HQ | 3 | 30-08-10 22:45 |
| Flathead CO level at idle. | kevin powles | The Softskin Forum | 11 | 08-11-09 10:45 |
| perkins problem | alleramilitaria | The Softskin Forum | 2 | 27-01-07 01:41 |
Threaded Mode