![]() |
|
|
|
#1
|
|||
|
|||
|
Hydamatic model
|
|
#2
|
|||
|
|||
|
Hi Wayne,
Don't worry about the left and right hand engines. It is possible to assemble a right hand version from an ACL (LH) marked engine and vice versa. Marco
__________________
Staghound F215633, 12th Troop "Sergeants Car" XII Manitoba Dragoons |
|
#3
|
|||
|
|||
|
Hi Marco,
I had a look at the motors and I can swap over the oil lines coming out of the crankcase. Thats easy done. ![]() How do I mount the generator to the other side? Is there any other changes required on the block? I know the radiator pipes are different, I have those. Also worked out the extra bit on the Hydramatic... it is a servo band from another gearbox added to increase the length of the tranny. Johnny made me a pin puller, worked a treat. |
|
#4
|
|||
|
|||
|
Wayne,
The generators are mounted with U-shaped brackets which attach on the crankcase. The crankcase has 4 mounting pads with 3/8" UNC threaded holes on both sides so the generators can be mounted on either side of the engine. The U-shaped brackets are different though for LH and RH engines. Using the wrong bracket will result in incorrect pulley alignment. Marco
__________________
Staghound F215633, 12th Troop "Sergeants Car" XII Manitoba Dragoons |
|
#5
|
|||
|
|||
|
Hi Marco,
Thanks for that. Checked over my parts and found that one generator has the mount attached, it is off a ACR motor. Now I need to find a left or make one. Also finding the drawings in the M6 manuals show a standard GMC motor most of the time and no reference in any of the books about the harmonic balancer or several other parts unique to this engine. Wayne. |
|
#6
|
|||
|
|||
|
Tried to get the brake drum off the hub but too much paint/rust put hold to this. There are holes to screw a tool into that push the rim off but not on my shift.
I took the hubs to a Truck Shop (BIG WHEEL) and they put them in the secret sauce to soak for an hour then pressed them off in the 100 tonne press. Then I removed the wheel nut bolts so I could remove the old paint from the hub centre. Never get tired as to how well made these parts are. I am going to anti seize the hell out of this drum when it goes back on. |
|
#7
|
|||
|
|||
|
Moderation.....especially that silver stuff. It has a mind and a life of it's own and will find it's way into the brakes if used excessively.
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| C30 Update | Keith Orpin | The Softskin Forum | 17 | 27-10-19 09:50 |
| W&P Update. | Ron Pier | The Softskin Forum | 2 | 04-12-12 01:27 |
| Boxing day update | sapper740 | The Sergeants' Mess | 12 | 12-01-09 12:30 |
| M75 update | aasurplus | The Armour Forum | 8 | 01-08-08 21:40 |
| Update | ron | The Carrier Forum | 20 | 31-12-06 11:41 |