Wireless Truck Furniture

[Chris Suslowicz]

Originally Posted by Johnny Canuck

Have some photos I saved from eBay.
Wireless Truck Furniture.
Geoff

The layout drawing is for an ASSU Tentacle with WS19 and TR1143, so will not be a particularly standard setup.

The radio table with the battery clamp frames on the back is probably for a WS11 because the battery frames look too shallow for an accumulator and are probably for a pair of 250 volt primary battery boxes.

The floor mounted battery frames will be identical in size and construction to the ones for the post-WW2 steel cased batteries (because both battery types had to be interchangeable during the changeover period). Batteries used were probably 6V 85AH or 6V 100/125AH, used in pairs. I can look the battery measurements up if required.

Chris.