|
|
#34
27-06-15, 10:48
|
||||
|
||||
Just to show how I make a lot of discs all the same size. I start with a length of 5mm plate and mark my circles, cut rough in the bandsaw, trim around on the notcher, drill a hole in the centre to fit a 1/2 inch bolt, clamp them together and lathe them to size. These parts are for the filter plates. 1 gets welded to the tank and the other one is bolted to it with a gasket. I'll be making the filter part tomorrow.
|
|
|
Threaded Mode