Chevrolet CMP C15 cab 11 body 2A1

[Jacek Nitkiewicz]

105 is correct

[Jacek Nitkiewicz]

wood roof frame first try

[Bob Carriere]

...for confirming the angle.

The wood work looks good.

Bob C

[Jacek Nitkiewicz]

mudgards fixed - it look like will fit new box
radiator with new insert

[Jacek Nitkiewicz]

cab almost disassembled

[Bob Carriere]

Hi Jacek

Can you measure the distance between the edge of the inner fender to the edge of the engine cover in centimeter.

I have found two different floor plate and different inner fenders on the cab 11 and cab 12 and I have no explanation why the difference.

It seems that some early cab 11 models had a narrower foot area than later cab 12 models but then I found some cab 12 with the same narrowed foot space. It also means that the inner fender is more bulbous as it protrudes more into the pass. and driver's floor area.

The inner fender on these models have notches cut in them to allow to clear the spring hangers...... I beleive that there is at least 30 cm differences.

Here is your picture with the area I would like you to measure.

Anybody else care to comment on the differences.....

Thanks

PS having problems attaching pictures

[Bob Carriere]

Having a hard time attaching pictures tonite.

Seems that when I try to hit the "manage attachment" box nothing happens???

will try posting the picture later.

Bob C