Wanted: CDN m151a2 front seat belts

[BCA]

There are some nice 3-point retracting seat belts sets available for Humvees. I have installed retro-fitted them into my Humvee front and back since it only had lap belts originally. The kits come with lots of extra hardware. I can't recall the exact details on how they mounted the M151A2 roll cage but I'm sure they are adaptable.

[super dave]

I used a set out of an Iltis.

[Scott Bentley]

Originally Posted by super dave

I used a set out of an Iltis.

I did similar and went with HLVW belts. They look close enough to the originals and work well.

IIRC, trying to go with the original Dodge Van belts wasn't worth the expense and were actually hard to source.

[Eric B]

Hello all

Thanks for the responses, its exactly what i was thinking. I have been looking for something similar on the internet. Especially something that will have the original covers fit it.

These were not designed to be left outside, the belts absorbed water and the webbing expanded. Then they were painted over.

Scott will have to look at your setup.

Thanks Eric

[Scott Bentley]

Originally Posted by Eric B

Scott will have to look at your setup.

Thanks Eric

The door is always open Eric. I've moved, but you'll find me