Electronic ignition upgrade

[Tony Wheeler]

Originally Posted by colin jones

I found that I needed to make a spacer plate that is 3/8" thick because the back of the crab dizzy is longer than the bell.

Colin, you don't need a spacer, you just need to discard the button extension. You only need the spacer if you have a pre-42 camshaft. Your motor has a post-42 camshaft, so the crab dizzy will fit straight on. Someone in the past has converted it to use a divers helmet distributor, by fitting the button extension. You just need to undo the conversion by removing it.

img155 - Copy.jpg

Crab Distributor 002 - Copy.jpg

Crab Distributor 009.jpg

Crab Distributor 003.jpg

TONY8214 - Copy (2).jpg