|
|
#11
27-04-14, 01:20
|
||||
|
||||
I just confirmed that 32-41 cams are approx 3/8" longer than 42-48 cams.
hence your problem. The cam is holding the dizzy out from the face of the plate as the crab has a longer nose. In 1942, the longer cam was discontinued. Anyone who needed to replace a cam in a motor with a divers helmet dizzy required a spacer button inserted into the end of the 1942 camshaft. You should grab hold of the front of your camshaft with a pair of pliers and give a wiggle, as you may simply have a spacer button in the end of the camshaft. If you have this button spacer simply pull it out and everything will fit. If not you need the 2 bolt spacer Part# 9104248 (http://www.ebay.com/usr/speedway_mot...p2047675.l2559 in the USA) which will fill the gap between mounting plate and the face of your dizzy.
__________________
3RD Echelon Wksp 1968 M274A5 Mule Baifield USMC 1966 M274A2 Mule BMY USMC 1966 M274A2 Mule BMY USMC 1958 M274 Mule Willys US Army 1970 M38A1 CDN3 70-08715 1 CSR 1943 Converto Airborne Trailer 1983 M1009 CUCV 1957 Triumph TRW 500cc RT-524, PRC-77s, and trucks and stuff and more stuff and and....... OMVA, MVPA, G503, Steel Soldiers Last edited by chris vickery; 27-04-14 at 01:47. Reason: new info 
|
|
|
Threaded Mode