Wanted: Ford CMP transfer case parts

[Phil Waterman]

Hi

I have mentioned this before, but will repeat, I've had very good luck using Speedie Sleeves to recondition these yokes.

Also a common leak point on these is actually the splines on the shaft, a little gasket cement on the splines of the yoke seems to help, remember to put the gasket cement on the inside of the splines not on the splines on the shaft. On the yoke the excess is pushed out on the shaft and it is pushed into the gear box.

The U bolts are still common truck size as are the universals.

Cheers Phil