|
|
|
|
#1
03-02-14, 18:26
|
|||
|
|||
Photos of Rifle Cup Locations
Hi Maurice
First I check my HUP against my Pattern 13 C60S while the two mounting locations for each is 3 inches center to center. The HUP uses 1/4x20 captive nuts welded under the floor while the C60S uses 5/16x? threaded directly into the 1/4 thick floor plate. Drivers Seat 1 Right Driver Rifle Clip & But Holder CMP.jpg 2 Right Driver Rifle Clip & But Holder CMP.jpg 3 Right Driver Rifle Clip & But Holder CMP.jpg Front Passenger/Co-driver 1 Left Front Rifle Clip & But Holder CMP.jpg 2 Left Front Rifle Clip & But Holder CMP.jpg
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com 
|
|
#2
03-02-14, 18:34
|
|||
|
|||
|
Middle Seat Locations
Middle Seat Left Side
1 Left Mid Rifle Clip & But Holder CMP.jpg 2 Left Mid Rifle Clip & But Holder CMP.jpg 3 Left Mid Rifle Clip & But Holder CMP.jpg I assume that the earlier HUPs with mid doors on both sides that the right side mount would be the mirror of the left. Middle Seat Right Side On HUP with no right mid door having the spare tire carrier in that location instead. 1 Right Mid Rifle Clip & But Holder CMP.jpg
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#3
03-02-14, 18:42
|
|||
|
|||
|
Rear Rifle Cup Locations
Right Rear Rifle Cup Mounting Holes
1 Right Rear Rifle Clip & But Holder CMP.jpg Left Rear Rifle Cup Mounting Holes 1 Left Rear Rifle Clip & But Holder CMP.jpg Does this provide the information you needed? I can post larger higher resolution versions of these photos if they would help or give you basic dimensions to locate the holes. Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
|
#4
04-02-14, 10:13
|
|||
|
|||
|
riffle clips
yes, realy thanks for that , it explains everyting .
The wooden blocks in a regular cab are in line with the vehicle , and I noticed on the hup they are under an angle . building year from this hup must be 43 . no data plate. 2 side doors , rectangular roof hatch , round instruments , hard rubber steering wheel. again thanks for info .
|
|
#5
06-03-14, 08:24
|
|||
|
|||
|
Thanks , brackets aree fitted.
Another question , were are the sidescreens stowed when not in use?
|
|
#6
06-03-14, 09:18
|
|||
|
|||
|
Sidescreen stowage
Hi Maurice,
The sidescreens are stowed in the wire mesh bins shown in the picture in post #6 from Phil Waterman. Cheers, Brian
|
|
#7
06-03-14, 14:49
|
|||
|
|||
|
Do you need pictures of the racks?
Hi Maurice
Do you need photos of the rack and the mounting points? Cheers Phil
__________________
Phil Waterman `41 C60L Pattern 12 `42 C60S Radio Pattern 13 `45 HUP http://canadianmilitarypattern.com/ New e-mail Philip@canadianmilitarypattern.com
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| M152 Interior Layout | Jason Ginn | Post-war Military Vehicles | 9 | 10-11-10 17:29 |
| Carrier Interior | kevin powles | The Carrier Forum | 1 | 20-08-09 13:17 |
| WD Interior Lamps | Richard Farrant | For Sale Or Wanted | 23 | 20-10-06 12:45 |
| UC Grenade Box Interior | rob love | The Carrier Forum | 7 | 13-04-06 05:09 |
| CMP Cab 12 interior | Steve Guthrie | The Softskin Forum | 10 | 03-04-05 17:53 |
Hybrid Mode
