![]() |
|
#8
|
|||
|
|||
|
You should point out that you work alone.......
....take your time...... the time allowed in the GM book is probably 3 or 4 hours...... at $105 an hour. Let me know if you need anything. Bob C Lance...... ...on the destruction of the transfer case.....based on experience M 37 Dodge the only time you would have that much damage is if the transfer case jumped out of gear while under a heavy load/torque. Trying to shift into gear while moving at high speed is almost impossible with straight cut gears..... it will grind a lot and small chips may break loose but rarely engage enough to really strip a series of gears. God ... and Phil... only knows how finicky the 4x4 linkage adjustment can be on a CMP and how body flex can undo careful adjustments.
__________________
Bob Carriere....B.T.B C15a Cab 11 Hammond, Ontario Canada |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Stuart Tank Trailing Arm Pin Extraction | Andrew Rowe | The Armour Forum | 7 | 03-05-13 00:07 |
| Easter Rally | Bob McNeill | Military Shows & Events | 7 | 09-04-12 12:22 |
| Weare NH Rally 2005 | Phil Waterman | Military Shows & Events | 1 | 08-08-05 03:10 |
| Sth Australian rally | Mike K | The Softskin Forum | 16 | 25-08-03 12:50 |
| MVC Rally | Jeroen Sleijpen | Military Shows & Events | 0 | 18-02-03 12:42 |