![]() |
|
#1
|
|||
|
|||
![]()
What an interesting thread, and so full of interesting 'terminology', too. Got a bit 'snippy' at one stage, which is regrettable, but I see we are back on track.
Now the 'Trailers, Artillery, No.27 Mk.1' (to use the correct nomenclature, rather than just calling it an 'ammunition trailer') is what it is by the military's definition: a two wheel 'trailer'. It acts in the capacity of a LIMBER in the artillery 'train', being located between the field piece and the towing tractor, and with its primary purpose being the carriage of ammunition (as per the 'civvie' dictionary, it's a limber, but...). To quote from the manual: 'The No.27 trailer can be employed either as the carriage trailer or as the front or rear ammunition trailer'. Of course, if we head back a little to the First World War, there were two 'types' of ammunition transporter for field artillery: the ammunition LIMBER and the ammunition WAGON - neither of which were officially called a 'trailer', by the way, until the 1930s (see below). The difference (besides the minutia of the equipment onboard) was where it 'sat' in the train: the ammunition Limber had a demountable perch pole and was drawn by the horse team. The field piece (gun) was attached to the rear of the Limber by a tow hook engaging the eye on the trail of the artillery piece. The WAGON had a fixed steel towing arm and was attached to the rear of a Limber in place of the field piece. It carried 'second line' ammunition. For every field piece there was, in theory, two horse teams: one dragging a Limber and the field piece, the other dragging a second limber and a Wagon. It was the wagons that were converted in Aust in WW2 to pneumatic wheels, not the limbers. Once converted, they were re-designated as 'Trailer, Ammunition, No.X Mk. X (P)' (X being the different configurations). The P indicated the conversion to pneumatic wheels. In 1939 (August, to be precise for Salesman Bob's benefit), the 'Artillery Mechanization' Minute by the Secretary of the Military Board discussed the conversion of 'Carriages and Trailers' to pneumatic wheels, and the return of 'Trailers, Harness saddler etc to Ordnance'. I'm not sure exactly when the change from 'Wagon' and 'Limber' to 'Trailer' occurred, but certainly by the late 1930s, the nomenclature had altered to designating the Wagon for 18pr ammunition as 'Trailers, No.9. Mk.1' and the limbers as 'Trailers, No.4'. (There were other designations for 4.5 inch HOW, etc), ie they were all grouped under the one broad designation, being 'Trailers' and differentiated by the No. and Mk. So, limbers and wagons were horse-drawn trailers by the 1930s, but pneumatic-wheeled trailers were never limbers or wagons.....hmmm Clear as mud, eh? I must admit I prefer accurate or pseudo-accurate descriptions for materiel, but that's just me. I still comprehend the use of words like 'Beep', peep, jeep (lower case, of course: don't want to infringe a Trademark!), Blitz, etc etc. But there are times when I have to react to the 'common' to correct the record. When Mud & Dust was published, a book reviewer took me to task for using the nomenclature 'F1' to describe the 'Truck 5 ton 6x6 GS' built by International in Australia, as the reviewer stated that everyone knows it is a Mk.5. What rubbish! The truck may have been popularly known as a Mk.5, but it was officially introduced into service as the 'F1', and was never the Mk.5. But it can get a bit ridiculous to use the FULL designation when writing. Take the Centurion tank for example, the Australian nomenclature was 'Tank, Combat, Full Tracked, Medium Gun, Centurion Mark 5/1 fitted for Wireless C42/B47' - bit much to repeat several times a page in an article or discussion! So we all shorten it to 'Centurion Mk.5/1' or whatever. As for 'Wicked-Pedia', the less said the better! Might be a starting point when looking for something, but always look for corroboration elsewhere. Mike C Last edited by Mike Cecil; 28-08-19 at 16:18. |
#2
|
|||
|
|||
![]()
Hanno,
This thread has gone way-away from 'sales and wants': maybe we should transfer it to somewhere more applicable within the Forum? Over to you..... Mike C |
#3
|
|||
|
|||
![]()
I am just looking for an affordable in Canada Limber. Cheers Rob
__________________
1942 C8A- HUW " Wireless Nipper" 1943 F-60S LAAT and 1939 Bofors 1942 C8 Wireless 1943 FAT/ 17 pounder 1941 C15 GS 2B1 |
#4
|
||||
|
||||
![]()
Hi Mike - as always you have come through with detailed knowledge that I do not possess. Thank you once again guru. As far as using Wikipedia, it is only one of my research tools and I treat its information with as much suspicion as any other source.
As far as the snippy bit, this was a historical carry over and I am glad that has been resolved. I must be getting more tolerant in my old ags. NO!! ![]()
__________________
Chevrolet Blitz Half-Track Replica - Finished and Running Ford F15 - unrestored Ford F15A X 2 - unrestored Website owner - salesmanbob.com |
#5
|
||||
|
||||
![]()
All in good fun Bob!
Makes life interesting, at least. Next time you're viewing my thread, drop a line and say hello. Always welcome. Seriously. ![]()
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
#6
|
||||
|
||||
![]()
Before this thread winds down and just to throw a spanner in Bob's works, think about this one........ the FV623 Alvis Stalwart Mk2 was officially designated ............ Artillery Limber
![]()
__________________
Richard 1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2 Member of MVT, IMPS, MVG of NSW, KVE and AMVCS KVE President & KVE News Editor |
#7
|
||||
|
||||
![]()
Oh dear god, no!!!!
__________________
Ford CMP, 115" WB,1942 (Under Restoration...still) Medium sized, half fake, artillery piece project. (The 1/4 Pounder) |
![]() |
|
|