need special 19 set dogbone

[Mike K]

Originally Posted by Bruce MacMillan

For Mike:

It sounds like you have a connector for use with the British HP amplifier. The 6 pin versions were #14 & #16 and the 12 pin version was #27. The 2 pin lead went to the socket marked "control" on the front of the amp.

Yes, that is the one Bruce . I have owned a few of the 19 set amps over the years, still have one here somewhere .

During the 1950's the Aust. army modified the 19 set amp., for use with the 122 set ( Aust) , the mod involved removing two of the 807's and fitting a meter in the front panel . A friend VK5WT had his 122 and the amp running , it put out around 50 watts carrier from memory . I did own one of those modified amps at one time .