|
|
#29
08-12-12, 04:09
|
|||
|
|||
replaced LHF side panel
From the advice gained in another thread, I proceeded to grind down a 45 deg edge on the LHF side replacement panel and fit the panel. Once straight and in the correct place, clamped it and welded it in.
Had some minor problems with the welder as the wire feed rollers spun on the mig wire, so had to replace the feed roller with a new one. A couple of the welds are not perfect, but they do look like some of the other dodgy welds around the hull. Also replaced the 2 blocks that hold down the bracket for the front 2 gal water container for the MG. Repalcing this panel was practice for the front panel section which will be next, having this panel removed from the hull made it easier to get in and out.
__________________
1943 Ford GPW Jeep "Follow Me" 1943 MBT trailer 1943 Dodge WC-57 Command Car 1943 Chev C60L Army Cargo Truck 1941 LP2 VR 731 Bren Gun Carrier 3" Mortar Carrying Under restoration: 1940 LP1 Bren Gun Carrier 194? 1 Ton Trl Ben Hur 1942 C15A with sunshine cabin MVPA 31338 
|
|
|
Threaded Mode