How to apply paint question

[r.morrison]

Hi Gary: When spraying paint, the maximum you should thin the product down is 15%. However.... this also depends on the product and the spray gun. 50/50 is definitely OUT! As suggested by Mr Clark, a lot of it is by trial and and error. Start out with a 10% thinning and do a trial spray on a "white surface". This will show you whether you're getting a nice fine/uniform spray pattern or spattering, which means the paint has to be thinned down a little more. Also experiment with the tip fan and the air pressure. In essence you have to marry all 3 together. Air pressure, tip size and viscosity of paint. It's not hard.....just a little patience and a comfort zone that you can work with. If you have any further queries, drop a line here on the forum......Robert