|
|
|
|
#1
21-05-12, 22:37
|
||||
|
||||
dimensions
Ben, as requested original spring dimensions.
spring length from end to end, not including the hooks ; 10 inches. spring diameter ; 1 inch. spring wire thickness : 4.5mm thick. hook wire thickness 1/4 inch. hook wire outside diameter 1 1/16 inch. 55 coils to the spring total. kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985. 
|
|
#3
22-05-12, 12:43
|
|||
|
|||
|
Ben
see my post #152 at the top of the page.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#5
04-06-12, 13:27
|
||||
|
||||
|
Small issue with hole alignment.
Hi, Has anyone fitted their anttena mount yet?, both mine wont line up on the carrier mounting holes, the top to bottom hole is correct but from side to side is incorrect, I can see what has happened, top to bottom measured then applied to side to side, but infact this is different. See pics attached.
looks like i will have to weld all the holes up and redrill, but I will need a measurement for the location of one hole, measurement in from the side and top or bottom. help! kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985.
|
|
#6
04-06-12, 20:59
|
|||
|
|||
|
Kevin
If this is what Nigel made, maybe the most diplomatic move would be to ask him via a p.m.
Then if you have no joy, I can give you the info you need.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
|
#7
04-06-12, 21:27
|
||||
|
||||
|
Lynn, P.M. sent, could you post the dimensions as I need to get the brackets to my welder who is off on holiday for two weeks this coming Thursday, hence the posted question.
I have not forgot about your downpipes. kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008. 3" Mortar Universal Carrier 1943 registered 06/06/2009. 1941 Standard Mk1 stowage Carrier, Caunter camo. 1941 Standard Mk1 stowage Carrier, light stone. 10 cwt wartime mortar trailer. 1943 Mk2 Daimler Dingo. 1943 Willys MB. 1936 Vickers MG carrier No1 Mk1 CMM 985.
|
|
#8
04-06-12, 23:00
|
|||
|
|||
|
Kevin
The centers vertically are 2 1/2"(63.4), and horizontally are 2 3/4"(69.8).
On mine the bump stop side is 12mm to the edge of the plate from the outside edge of the hole. The other side is slightly less at 11mm. Suggestion; If you are welding them up. Pop your rivets out, put one or two holes in correctly (squaring the bkt to the hull and checking with the holes in your hull) and use the hull as a jig for the others. Check the hole centers in the hook arm, to make sure it works with these measurements.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions....
|
 |
|
|
That was last year, I've had a sleep since then....remember the goldfish?
Hybrid Mode
