|
|
#19
07-05-12, 18:14
|
|||
|
|||
not 16 TPI
Guys,
I know it says in the manual that the nut that goes on the gear selector shaft is ½” BSF, but at least for the shaft in my hand it is not 16 pitch. The nut I made using the ½” BSF 16 pitch tap in the pic will not fit on the shaft. The second picture also shows a thread file with the 16 pitch rotated in contact with the shaft threads and you can see that they do not match. Stephen 
|
|
|
Threaded Mode