|
|
|
|
#1
09-04-12, 19:14
|
|||
|
|||
For the receiver to work you need only a 12vdc supply for the filaments and 265vdc for the receiver B+.
There have been circuits published in 73 & other ham radio mags. These values are similar to most tube type receivers so something on the net might work. All my docs are currently in a container somewhere on the Atlantic. If no one else comes up with anything it will be a few more weeks until I can access them. 
|
|
#2
10-04-12, 03:47
|
|||
|
|||
|
I talked to well known radio ham /WW2 re enactor Dave Lawrence a couple of years ago at the Oshawa show. He has written extensively on the #19 set as well as set up displays at MV shows. He assured me that in the " old days" of ham radio many AC power supplies were easily built to eliminate the need for the heavy / ugly /power hungry power supply.As for the vibrator most of them are long dead. I just want a nice simple AC powr supply to run the receiver only. If I come up with a schematic I will pass it along!
|
 |
|
|
Hybrid Mode
