MLU FORUM  

Go Back   MLU FORUM > BUY, TRADE or SELL > For Sale Or Wanted

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 04-04-12, 22:31
lssah2025's Avatar
lssah2025 lssah2025 is offline
Driver Advance!
 
Join Date: Apr 2009
Location: St. Louis, Mo, and OCONUS
Posts: 487
Default

BUMP... need a Solex 40RZINEO/C654/0 carb BAD....
__________________
39 Austin 8 Tourer
42 Humber Heavy Utility
42 C15A Wireless Truck
43 Humber AC MK IV F133744 "Vandal" tri-owner
43 A27L Centaur MK III T185481
Reply With Quote
  #2  
Old 05-04-12, 09:39
Lynn Eades Lynn Eades is offline
Bluebell
 
Join Date: May 2003
Location: Tauranga, New Zealand
Posts: 5,541
Default Lance / Richard

Lance; I believe your first one (Ern Lake) is a Carrier jack. What date is on it please?
I'd suggest the " correct one" is also originally carrier equipment. Is it dated 1943?
Richard; I can't see these really short jacks being original issue to an R.L. Bedford, (However, I can see the QMS issuing them for same)
My two Ern Lake 4 tonners are dated 1940 and 1941. I have seen a few different makes of the same type in cast steel and ally, one of which was a Britool at 4 1/2 ton (if my memory serves me correctly. A U.K. based forum member has told me of them, bearing 1960's dates, on epay.
__________________
Bluebell

Carrier Armoured O.P. No1 Mk3 W. T84991
Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6.
Dodge WC55. 37mm Gun Motor Carriage M6
Jeep Mb #135668
So many questions....
Reply With Quote
  #3  
Old 05-04-12, 09:47
Richard Farrant's Avatar
Richard Farrant Richard Farrant is offline
Registered User
 
Join Date: Feb 2003
Location: Kent, England
Posts: 3,641
Default

Quote:
Originally Posted by Lynn Eades View Post
Richard; I can't see these really short jacks being original issue to an R.L. Bedford, (However, I can see the QMS issuing them for same)
.
Lynn,
I can assure you those jacks were part of the MK and RL kit and I have carried one on my QL for 20 years or more, they have a higher lift than you might imagine and there should be an extension block that slides over the top. Always carry a wood board as well in case of having to jack on softer ground.
__________________
Richard

1943 Bedford QLD lorry - 1941 BSA WM20 m/cycle - 1943 Daimler Scout Car Mk2
Member of MVT, IMPS, MVG of NSW, KVE and AMVCS
KVE President & KVE News Editor
Reply With Quote
  #4  
Old 05-04-12, 21:29
lssah2025's Avatar
lssah2025 lssah2025 is offline
Driver Advance!
 
Join Date: Apr 2009
Location: St. Louis, Mo, and OCONUS
Posts: 487
Default

Unfortunately I do not know the dates, they are sitting in the UK at the moment..
__________________
39 Austin 8 Tourer
42 Humber Heavy Utility
42 C15A Wireless Truck
43 Humber AC MK IV F133744 "Vandal" tri-owner
43 A27L Centaur MK III T185481
Reply With Quote
  #5  
Old 11-04-12, 13:56
BCA BCA is offline
Brian Asbury
 
Join Date: Oct 2006
Location: Ontario, Canada
Posts: 658
Default Solex carb

I have a new Solex carb but can't identify its use: 35 RZFA IPO. Perhaps it is similar to the one you need. Perhaps someone can identify an application.
........... Brian
Reply With Quote
  #6  
Old 11-04-12, 19:38
Alex Blair (RIP) Alex Blair (RIP) is offline
"Mr. Manual", sadly no longer with us
 
Join Date: Feb 2003
Location: Ottawa ,Canada
Posts: 2,916
Default bRIT..

Quote:
Originally Posted by BCA View Post
I have a new Solex carb but can't identify its use: 35 RZFA IPO. Perhaps it is similar to the one you need. Perhaps someone can identify an application.
........... Brian
Brian/..
The Bedford uses a Solex 35 carb..
As do many other vehicles from a "Douche Bowl" (2CV Citroen )to a Ford Jeep..
But here is one that may be a hint in the right direction to identification..
Good luck..

Alex
NOS BEDFORD SOLEX 35RZFAIPO LM52 CARBURETOR.

http://www.ebay.ca/itm/NOS-BEDFORD-S...item256680b7cb
__________________
Alex Blair
:remember :support :drunk:
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 21:24.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016