|
|
#11
13-02-12, 17:40
|
|||
|
|||
The adptor plate shown above works with the 1942 or later water pump which can best be identified by the angled outlet and the two holes in the original backing plate. If you want to use a similar plate with the earlier pump used on CMP 216s (identified by an outlet parallel to the ground and a single hole in the backing plate) you will need to make it yourself. If you choose to make such a plate, pay attention to the clearance for the bolt head that is more or less hidden behind the outlet.
|
|
|
Threaded Mode