Just to be sure this is the long tube that has such a tight fit it will not turn. It has the small loop on it to attach the chain for the cap and the rolled edge at the bottom tha holds the basket type of filter...I can't see any way for this to clear the lip that holds the cap as it is the size if the filler neck? I tried to budge it with a puller and all i am doing is rolling the edge at the bottom...Maybe some heat and some penitrating oil if it is really meant to come out? I have seen the piece you are talking about but this looks to be two pieces or halves welded together put in then capped off with the cap ring threads.
__________________
M38A1 CDN 53-32490
|
15-11-11, 19:04
Threaded Mode