Wireless Set 19

[Dave Page]

Hi Guys,
you will only get an RF burn while the WS19 is transmitting (TX) unless you have an X.5,5KV MkII Condenser fitted, which has stored the charge from TX. Removing the 500v fuse will disable the TX side of the WS while still allowing RX. If you are convinced that the shock from the 'A' aerial will be something you will just shake off, bear in mind that on TX, with PA and Vario tuned just right, a 110v 40 watt light bulb used as a dummy load will glow.

Laws vary so you may want to check; I believe in the UK -mere- possession of the parts is enough to get you in a lot of trouble should the plod not like your face.

As for the 'B' set, while it may be a very low powered AM set (.4 watts) it also radiates on FM. I tested my set out to 100 yards, and picked the signal up on a Sony "Watchman", which is an FM receiver. This was not done at a show; one doesn't want to temp fate. Caution is the watchword.
Cheers,
Dave