Chevrolet C30 Radiator

[20387774]

Does the chev C30 use the same radiator as the chev g506 1-1/2 ton trucks?

John

[Phil Waterman]

Originally Posted by 20387774

Does the chev C30 use the same radiator as the chev g506 1-1/2 ton trucks?

John

John you ask a good question but I'm not sure there is a simple answer, if you look in the CMP 3 ton Chev parts book there are six different radiator unit numbers listed, if you look in the Mapleleaf Master Parts book that covers `38 to `51 there are even more truck and heavy duty radiators listed (didn't look like any of the part numbers were a direct match.

I think the only way we are going to answer your question is if someone has both radiators and can confirm the measurements. I will e-mail one of my US Chevy MV collectors friend and see if he has any units that I can look at to see if they look alike.

Cheers Phil

[20387774]

Thanks Phil. I was just asking because I pulled a good rad out of a 41 chev that still was holding antifreeze and thought I could swap it for a spare tire carrier. I wasn't sure about offering the swap because the g506 uses a 235 cu. in. motor.

John

[Phil Waterman]

Originally Posted by 20387774

Thanks Phil. I was just asking because I pulled a good rad out of a 41 chev that still was holding antifreeze and thought I could swap it for a spare tire carrier. I wasn't sure about offering the swap because the g506 uses a 235 cu. in. motor.

John

Hi John

The CMP radiator if in good condition is over sized from the standard Chevy I believe. I am using the the original 1942 radiator of by Pattern 13 C60S which has a radio box on the back road weight between 11-12,000 lbs. and I often tow the 1200 lbs. generator trailer behind it. The truck never over heated with the original 216 cu.in. even in very slow parades, or hauling steep grades. The same radiator handles the 261 engine and if anything it runs a little cooler.

Cheers Phil

[20387774]

Here's a picture of the rad from a g506. Maybe someone could compare?



A friend of mine has one of those rads with the two inlets/outlets for a Ford too if anyone needs one.