|
|
|
|
#1
15-02-10, 11:18
|
|||
|
|||
Jordan
Thats why there is a notch in you brake drum rib.It lets you do 1 bolt at a time.
__________________
Bluebell Carrier Armoured O.P. No1 Mk3 W. T84991 Carrier Bren No2.Mk.I. NewZealand Railways. NZR.6. Dodge WC55. 37mm Gun Motor Carriage M6 Jeep Mb #135668 So many questions.... 
|
|
#2
16-02-10, 14:58
|
|||
|
|||
|
Think the reason why they say to undo the drums and loosen the back plates is becouse of the two shims that are between the hubs and the armoure if you dont loosen them off you will struggle to replace them when you put it back on. Trust me i have done this its not fun you can get around it with the use of a rachet strap but its not very safe Taking the axle off is fine it just drops out but watch out as your carrier will lift up as you drop it off.
|
|
#3
18-02-10, 19:51
|
||||
|
||||
|
yeah and make sure you remove the brass speedo cable union before you drop the axel or you will cry for a while..... personally i would pull the drums as it MAKES you check the assemblies within plus it takes a massive amount of weight off the axel to move it around.
each to their own though 
__________________
is mos redintegro __5th Div___46th Div__ 1942 Ford Universal Carrier No.3 MkI* Lower Hull No. 10131 War Department CT54508 (SOLD) 1944 Ford Universal Carrier MkII* (under restoration). 1944 Morris C8 radio body (under restoration).
|
 |
|
|
Hybrid Mode
