|
|
|
|
#1
01-01-10, 18:04
|
|||
|
|||
Look at aviation tool supply houses. Most of their rivet toools are smaller than we need but they may go large enough. Also check Mac's Auto (sellers of Ford parts) they list some rivet sets. Remember that the rivet gun is usually on the factory formed head and the bucking bar does the field formed head. In other words, for a rivet that is domed, round or whatever at each end, the rivet set in the hammer and the face of the bucking bar should have the same shape depression.
|
|
#2
01-01-10, 18:37
|
|||
|
|||
Why not get a couple turned up !,we made a couple from air chisles.
Rob..................rnixartillery. 
|
 |
|
|
Hybrid Mode
