|
|
|
|
#1
01-01-10, 18:51
|
||||
|
||||
Same here
I would like to knw as well, more original and all that.
Gary BTW Richard, pics of my carrier have been posted here, you also posted some. If you still need some for a reference to the ones Chris is selliing let me know and I will post them again.
__________________
C-15A C-60S Universal Carrier MK II x4 M152 CDN VW Iltis and M101 Trailer   
|
|
#2
01-01-10, 19:04
|
|||
|
|||
|
Look at aviation tool supply houses. Most of their rivet toools are smaller than we need but they may go large enough. Also check Mac's Auto (sellers of Ford parts) they list some rivet sets. Remember that the rivet gun is usually on the factory formed head and the bucking bar does the field formed head. In other words, for a rivet that is domed, round or whatever at each end, the rivet set in the hammer and the face of the bucking bar should have the same shape depression.
|
|
#3
01-01-10, 19:37
|
|||
|
|||
Why not get a couple turned up !,we made a couple from air chisles.
Rob..................rnixartillery. 
|
 |
|
|
Hybrid Mode
